Products Categories
Contact Us

ADDRESS:Shangma Industrial Development Area, Shitang Town, Wenling City, Zhejiang Province, China

MOBILE:+8618758664847

E-MAIL:dawn@dawnmould.com

TEL:+86-576-86727770

  • Hot Runner Syringe Barrel Mould

    Hot runner mould use sol-m hot runner system, there is no any recycle material. It can save a lot of material and products are more better. The cycle time only 8-10s, it will increase the output and reduce the weight of plunger!
    Read More
  • 1ML Syringe Plunger Mould

    Syringe size from: 0.5 to150 ml
    Syringe Plunger Mould Cavities Nr. from 16 cavities to 80 cavities.
    Syringe Plunger Mould cavities steel: DC53
    Injection Gate Type: Pin point gate
    Product Material: PP or PE
    Syringe Plunger Mould life...
    Read More
  • 2ML Syringe Plunger Mould

    Zhejiang Sol-millennium Plastic Mould Co.Ltd. is a leading professional manufacturer that specializes in the research, development and sale of Syringe Moulds international.
    Read More
  • 3ML Syringe Plunger Mould

    Medical syringes are sometimes used without a needle for orally administering liquid medicines to young children or animals, or milk to small young animals, because the dose can be measured accurately and it is easier to squirt the medicine into the subject's mouth...
    Read More
  • 5ML Syringe Plunger Mould

    Zhejiang Sol-millennium Plastic Mould Co.Ltd. is a leading professional manufacturer that specializes in the research, development and sale of Syringe Moulds international. It also has absolute superiority in the fields of Safety Syringe and Auto-Disable Syringe.
    Read More
  • 10ML Syringe Plunger Mould

    1. Business term:FOB Shanghai/Ningbo by sea or air
    2. Production time:90day
    3. MOQ:1SET
    4. Packing:1SET/woodern box
    5.Payment:TT,L/C,
    Read More
  • 20ML Syringe Plunger Mould

    Syringes are also commonly reused by diabetics, as they can go through several in a day with multiple daily insulin injections, which becomes an affordability issue for many. Even though the syringe and needle are only used by a single person, this practice is still unsafe as...
    Read More
  • 30ML Syringe Plunger Mould

    Syringe plunger is one of the key parts of a syringe. It is the part that fits inside the tube or barrel of the syringe.
    Read More
  • 50ML Syringe Plunger Mould

    When depressed, the plunger forces fluid or gas out the opening of the syringe. When drawn back, it can pull fluids and gases into the syringe Our Services We guarantees that quality of Goods supplied according to international quality standard. Quality guarantee and free...
    Read More
  • Feeder Syringe Plunger Mould

    The head of the syringe can be fitted with needles, nozzles, or tubing, depending on how it is being used. Syringe plungers are intended to be used once with an individual syringe and then discarded.
    Read More
  • Semi Hot Runner Syringe Plunger Mould

    When the plunger is pulled back, a vacuum is created inside the barrel and the vacuum will suck up fluids or gases the syringe is in contact with. If the plunger is not the right size or is defective, it can be difficult to pull it back or push it forward, and this can...
    Read More
  • Hot Runner Syringe Plunger Mould

    Hot runner barrel mould use sol-m hot runner system, there is no any recycle material. It can save a lot of material and products are more better. The cycle time only 8-10s, it will increase the output.
    Read More
Copyright © Zhejiang Sol-Millennium Plastic Mould Co.,Ltd All Rights Reserved.