Products Categories
Contact Us

ADDRESS:Shangma Industrial Development Area, Shitang Town, Wenling City, Zhejiang Province, China

MOBILE:+8618758664847

E-MAIL:dawn@dawnmould.com

TEL:+86-576-86727770

Injection Mold Mold Frame Design And Standard Parts Selection Need To Pay Attention To What
Jul 09, 2018

A large part of the standard parts have been commercialized and are readily available on the market. The use of standard formwork and standard parts is extremely beneficial for shortening the manufacturing cycle and reducing the manufacturing cost. In the design process of injection molds, mold design software, mold intelligent design software, mold frame design and selection of standard parts are a crucial part. When designing the formwork, it is necessary to select the formwork frame as much as possible to determine the form, specification and thickness of the A and B plates of the standard formwork. Standard parts include two types: common standard parts and standard parts for molds. General standard parts such as fasteners. Standard parts for molds such as positioning ring, sprue bushing, push rod, push tube, guide post, guide sleeve, mold-specific spring, cooling and heating element, secondary parting mechanism and standard components for precision positioning. A large part of the standard parts have been commercialized and are readily available on the market. The use of standard formwork and standard parts is extremely beneficial for shortening the manufacturing cycle and reducing the manufacturing cost. After the buyer has been sized, the necessary strength and rigidity calculations are performed on the mold-related parts to check that the selected formwork is appropriate, especially for large molds.

Related News

Copyright © Zhejiang Sol-Millennium Plastic Mould Co.,Ltd All Rights Reserved.