Products Categories
Contact Us

ADDRESS:Shangma Industrial Development Area, Shitang Town, Wenling City, Zhejiang Province, China

MOBILE:+8618758664847

E-MAIL:dawn@dawnmould.com

TEL:+86-576-86727770

Syringe syringe manufacturing method
Jul 09, 2018

The syringe barrel can be made of plastic or an all-glass syringe, and typically has a scale indication indicating the volume of liquid in the syringe. Glass syringes can be sterilized with autoclaves, but because modern syringes are less expensive to process, modern medical syringes are mostly made of plastic, which further reduces the risk of blood-borne diseases.

Infusion bag permeability tester test principle: using the principle of differential pressure method, the pre-treated sample is placed between the upper and lower test chambers, forming a constant pressure difference on both sides of the sample, the gas is in the differential pressure Under the action, the high pressure chamber penetrates into the low pressure chamber through the membrane, and the pressure change of the low pressure chamber can be monitored to calculate the barrier parameter of the test sample.

When the core rod is pulled out, liquid or gas is sucked from the small hole at the front end of the barrel, and the liquid or gas is squeezed out when the core rod is pushed in. This process of drawing or injecting a gas or a liquid with a syringe and a syringe is called an injection.

This approach can significantly reduce accidents that doctors and nurses accidentally get stuck with when using a needle syringe. According to reports, most of the existing needle-free syringes use the force of the spring to emit liquid to the inside of the skin with strong pressure, but this may damage the nerves and also cause the patient to feel certain pain.

The syringe barrel can be made of plastic or an all-glass syringe and typically has a scale indication indicating the volume of liquid in the syringe. Glass syringes can be sterilized with autoclaves, but because modern syringes are less expensive to process, modern medical syringes are mostly made of plastic, which further reduces the risk of blood-borne diseases. The spread of disease among drug users who are intravenously drug-injected, especially the spread of HIV and hepatitis, is associated with repeated use of needles and syringes.

The syringe business was born out of a large number of participants in the online advertising economy and regulatory confusion. Because this problem is very complicated, the industry often lacks understanding and is more difficult to deal with. We hope that through our research, we can make the online advertising industry recognize the existence of advertising syringe problems and work together to cope.


Related Industry Knowledge

Copyright © Zhejiang Sol-Millennium Plastic Mould Co.,Ltd All Rights Reserved.